Masteremaco SBR 3 Price in Bangladesh

Masteremaco SBR 3 price in bangladeshis a milky-white, Styrene Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization. When used with cement, concrete and plaster, it reduces the mixing time of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.

• Concrete repair: Spalled concrete, repairing floors, beams and pre-cast slabs, chajjas etc.
• Bond Coat: For bonding new concrete to old concrete, plaster, stone/brick masonry.
• Plaster repair: For repairing plaster or making water proof plaster which is better than normal plaster.
• Floor screeds and toppings: Abrasion resistant and non-dusting floors.
• Waterproofing: Basements side walls and rafts, lift pits, inspection pits, sunken/overhead water tank, sunken portions of bathrooms and toilets, balconies, chajjas,exposed roofs before finished screed.
• Other typical applications: Bedding tiles, fixing or re-fixing slip bricks.

Features and Benefits:

• Multiple applications: Robust product that is economical, easy to handle and store.
• Easy to Mix: Faster mixing to enhance worker efficiency.
• Shrinkage/crack control: High flexural / tensile strength to control cracking.
• Mortar modifier- Improved flexibility, no bleeding, lower water cement ratio and high resistance to water penetration.
• Improves physical/mechanical properties – higher abrasion resistance, good adhesion to building materials similar thermal characteristics to concrete.
• Corrosion control: Prevents corrosion of embedded steel.

Applications:
Surface Preparation:

• Remove all loose concrete, grease, mould oil or curing compound from concrete and steel surfaces using wire brush, scrubber.
• Saw cut the concrete areas to a square or rectangular profile to a minimum 10mm depth at the extreme edges.
• Roughen the surface free of loose particles and dust and saturate with water.
• Remove excess/standing water.